Model:ND8,ND9 insert ,1ml PE-plug, PP 300ul micro-insert

Volume: 150ul、250ul、300ul
IP150 150ul 150ul insert with mandrel interior and polymer feet,29*5mm;suits for ND8 vials
IP250 250ul 250ul insert with mandrel interior and polymer feet,29*5.7mm;suits for ND9 vials
I250 250ul 250ul micro-insert,31*5mm，clear glass，flat bottom;suits for ND8 vials
I300 300ul  250ul micro-insert,31*6mm，clear glass，flat bottom;suits for ND9 vials
V181 1mlshell vials,1st hydrol glass,clear,8mm PE-plug,soft,without insertion,8.2*40mm
VP91  0.3ml pp short screw-thread micro-vial,clear 11.6*32mm
VP93 0.3ml pp short screw-thread micro-vial,amber 11.6*32mm
VP101 0.3ml PP snap ring micro-vial,clear 11.6*32mm
VP103 0.3ml PP snap ring micro-vial,amber 11.6*32mm

Package：inner packing：shrink plastic    

outer packing：carton

Product presentation:

     1ml micro vials are used in many conventional HPLC, This is a more economical choice for them. In order to ensure the rational use of injection bottles. All tested qualified micro-sample vial are sold with polyethylene cap. Micro-sample vials are made of transparent glass, amber glass and polyethylene.  specifications of8 x35mm micro-sample vial is designed specifically for Alcott autosampler.
    1ml vials can be used to autosampler and used as sample storage vial.The cap is made of high quality PE . precise manufacturing tolerances,
Well-controlled manufacturing environment when manufacturing a micro-sample vial, directly put the inner insert into the sample vial when sampling . That is a good choice for limited volume.
 

inner  Insert:
Used with 8mm open-top 2mL small opening screw-thread matching vials (ND8)
----I250 IP150
Used with 9mm open-top 2mL wide opening short screw-thread matching vials (ND8)
----I300 IP200

directly put the inner insert into the sample vial when sampling . That is an economic choice for limited volume.

 8mm inner cannula and small mouth opening 2mL vials matching thread using (ND8) -I250 & IP150 short thread with 9mm wide-mouth opening 2mL vials

PP vial

 Main applications for Plastic vials are atomic absorption, water and
.protein analysis, capillary electrophoresis, ion chromatography, etc. 1.5ml Polypropylene Short Thread Vial with slightly concave shaped
bottom. Usable in HPLC as a possible alternative to silanized glass
.vials for pH-sensitive and aqueous samples. .TPX has a crystal clear transparency and good chemical resistance。 Any combination of our plastic vials with one of our seals can be
obtained as a 2in1 KIT。 Also available our so-called TopSerts Vials: transparent and amber
.TPX Micro-Vials with a Glass Insert  Special Push-On Cap with thinner penetration point made of
Polyethylene for Snap Ring Vials and Crimp Neck Vials ND11